Posts Tagged ‘Brian Anderson’

I’ve been spending some quality time with spreadsheets and have an update on the way building regs for housing treats CHP. It’s not as simple as I thought here, although the result is similar. The incorrect method I wrote about a few weeks back is still in use, but it’s different from what’s happening in SAP 2005. Here’s a breakdown:


Read Full Post »

[update March 20: I’ve looked further into how SAP treats CHP and written it up here. So while the method described below is being used elsewhere in the industry, the criticism doesn’t apply to SAP.] 

I’ve written on this topic before but maybe I didn’t succeed in making clear just how far off the mark the standard method is when estimating carbon emissions from CHP. Why does it matter? Here are some reasons:

  • Right now, big developers and the Housing Corp are assuming CHP can get them to level 4 under the Code for Sustainable Homes and this may not be true.
  • These emissions figures can determine whether or not a scheme gets planning permission or passes building regs.
  • The nascent micro-CHP industry (expected to be worth £2billion per year across Europe) is using this flawed method to back up its sustainability claims. Changing from a commonsense approach to the much more forgiving “standard” approach explains why the first Carbon Trust interim report on the micro-CHP field trails was so bleak and the second was so rosy.   

There’s a good chance that, if I’m right and the standard approach is flawed, when the CLG and BRE realise their mistake, the rules will change, leaving public and private sector developers and the micro-CHP industry with a very costly mess to clean up. (more…)

Read Full Post »

Much later than planned, but here it is. In summary, micro-CHP saves 5% to 10% of carbon in large inefficient houses but only if you use a flawed methodology and give yourself extra-extra credit for displacing grid electricity. A few of the key findings:

  • The trial has demonstrated that the carbon and cost savings from Micro-CHP are generally better for buildings where they can operate for long and consistent heating periods.
  • In small commercial applications, the field trial has shown that Micro-CHP systems can provide typical carbon savings of 15% to 20% when installed as the lead boiler in appropriate environments.
  • The domestic Micro-CHP systems monitored in the trial have the potential to provide typical carbon savings of 5% to 10% for older, larger houses with high and consistent heat demands (over 20,000kWh/yr).

So since the last report, the Carbon Trust has toed the industry line that the 0.568 figure should be used.

There’s some very interesting output from the boiler field trials in the report as well. In particular, the boilers they’re monitoring are generally performing 4% to 5% below their SEDBUK rating.

Read Full Post »

[Update March 20 – while it’s true that SAP gives misleadingly high emissions savings for CHP, I got the methodology wrong. See an updated post here. Points 3 and 4 below are still valid.] 

The SAP results for dwellings using CHP are badly skewed. This may cause large developers to formulate strategies for meeting the Code for Sustainable Homes which fall well short of the targets.

Doing some research this week, I read the Housing Corporation’s report on the estimated costs of meeting various levels of the Code for Sustainable Homes. It’s an interesting document, but at a certain point I was confused by their claim that you can meet the carbon reductions required by code level 4 (i.e. a 44% reduction in DER relative to TER) just by using gas CHP. In fact, when I looked closer I found that in some cases, they were claiming an emissions reduction of over 50% – an extremely high figure. Something closer to 10 and 15% is much more reasonable, unless you want to get Orchardesque.

The source of these wild claims is the Government’s Standard Assessment Procedure for dwellings – SAP 2005. As hinted at in the CHP debate running in the BSJ over the summer, SAP does some funny things when it comes to CHP. Have a closer look at the SAP worksheets and you find that SAP:


Read Full Post »

%d bloggers like this: